BT-150N 3-Axis CNC PCD&PCBN Tool Grinder For Hot Selling
Namai > Produktai > BT-150N 3-Axis CNC PCD&PCBN Tool Grinder For Hot Selling
BT-150N 3-Axis CNC PCD&PCBN Tool Grinder For Hot Selling

BT-150N 3-Axis CNC PCD&PCBN Tool Grinder For Hot Selling

BT-150N 3-Axis CNC tool grinder's main components are the bed, the bed is the basic support of the grinder, and it is equipped with a grinding wheel frame, a work table, a head frame, a tailstock, and a lateral sliding saddle. These components maintain an accurate relative position during operation. The inside of the bed is used as an oil pool for hydraulic oil. The head frame is used to install and clamp the workpiece and rotate the workpiece. The headframe can be rotated 90° counterclockwise in the horizontal plane.

Siųsti užklausą

Produkto Aprašymas:

BT-150N 3-Axis CNC tool grinder System Features

1. The standard number of controllable axes of the system is 2 axes, which can be expanded to 3 axes, plus one liquid control; 2. Small display and setting unit 0.001mm; 3. Standard ISO code block, relative/programming, special instructions for grinding machines; 4. It is especially suitable for the slow feed and smooth design of grinding, suitable for real-time adjustment of speed; 5. Position over tolerance protection, software/hardware overtravel protection, drive alarm detection; 6. S curve automatic acceleration and deceleration, adjustable acceleration and deceleration time parameters; 7. Macro variables, macro definition programming, to achieve a variety of logical relationships; 8. Automatic wheel dressing and grinding size correction compensation; 9. Embedded software PLC; 10. Special safety protection measures for grinding machines; 11. System parameters, user PLC program user-defined backup read and write function; 12. External measuring tool closed-loop control function.

Consists of 3-Axis CNC tool grinder

BT-150N 3-Axis CNC tool grinder The grinding wheel spindle for supporting the grinding hole. The CNC tool grinder spindle is driven by a separate motor. The wheel frame is used to support and drive the high-speed rotating grinding wheel spindle. The grinding wheel frame is mounted on the sliding saddle. When the short conical surface needs to be ground, the grinding wheel frame can be adjusted to a certain angular position within the horizontal plane by ±30°. The tailstock and the head frame together support the workpiece, and the sliding saddle and the lateral feeding mechanism rotate the lateral feeding handwheel so that the lateral feeding mechanism can drive the sliding saddle and the grinding wheel frame thereon for the lateral feeding movement. The CNC tool grinder table consists of two upper and lower layers. The upper table can be rotated around the horizontal plane of the table to an angle (±10°) to grind a long conical surface with a small taper. Rack and tailstock. They can be reciprocated longitudinally along the bed rails along with the workbench.

Technical Parameters of BT-150N 3-Axis CNC PCD

Spindle and Grinding Wheel
The diameter of the Grinding wheel 150mm
Grinding wheel center hole 40mm
Power of grinding spindle 5KW
Adjustable range of grinding speed(RPM) 1000~8,000RPM
Servo motor swing, the adjustable oscillation frequency 0~50times/min
Grinding wheel movement range(X ) 350mm
Changeable Clearance Angle -5°~25°
Tool work-head
Max. Oscillation Range 30mm
Max. Oscillation Frequency 60times/minute
Table movement range  in the feed direction 130mm
Work-piece rotation range in the axial direction 360°
Linear scale resolution 0.001mm
encoder resolution 1'
CCD Monitoring System
Max Magnification of Optical Microscope 0.7~4 times
Magnification of CCD Measuring System, roughly 80times
12Industrial Displayer 12 “
Coolant Tank with Filter Paper About 70 L
Power Supply and Dimensions
Electrical Supply 12Kw
Overall Dimensions L╳W╳H 1890╳1650╳1980mm
Voltage Requested 380V/Three-phase /50Hz
Weight With Coolant Tank 2400Kg

Užklausa

Sužinokite daugiau apie mūsų produktus Skaityti daugiau